| |  |  |      |  |  | | | | Enhanced UV Resistant Polycarbonate | -
-
Barrel vaults, windows, bus shelters -
PRODUCT PROFILE: With impact strength 30 times that of acrylic and approximately 10 times that of impact modified acrylic, HYZOD SunLife offers the additional benefit of a protective surface layer for exceptional resistance to weathering and color shift. Unlike solvent based technologies, HYZOD SunLife is co-extruded and requires no special forming techniques or molds. Additionally, SunLife can be cold formed to 100 times its thickness for cost-effective barrel vaults and covered walkways. HYZOD SunLife sheet is a polished-enhanced, UV-resistant polycarbonate with exceptional weatherability and superior impact strength. HYZOD SunLife offers an extended service life and resistance to color shift. HYZOD SunLife is easily formed, fabricated & decorated, and requires no special forming techniques on male or female molds. -
Excellent resistance to UV weathering and yellowing -
Cold forms to tight radii -
No special molds, techniques or release agents required -
Clear, white & solar colors -
Superior formability compared to competitive products -
Excel is available two sides -
Full 10-year warranty against breakage, excessive yellowing, loss of light transmittance
| SHEET SIZES:
(Polished surfaces/UV-coat 1 side):
Gauges: 3/32" - 3/16"
Lengths: 100", 125"
Widths: 52", 64", 75", 100" | REEL SIZES: (HYZOD Only)
(Polished surfaces/ UV-coat 1 side):
Gauges: 3/32" - 3/16"
Lengths: 300', 450'
Widths: 55", 66", 76", 102" | STANDARD COLORS: Clear, White (SunLife is also used in signs exposed to extreme sunlight) | PROPERTY | HYZOD SL | UNITS | TEST METHOD | | GENERAL | | Specific Gravity | 1.2 | - | ASTM D-792 | | Chemical Resistance | Pass | | ANSI Z26.1 | | Water Absorption .125" 24 hrs | 0.015 | % | ASTM D-570 | | OPTICAL | | Transmittance .125" | 85 | % | ASTM D-1003 | | Haze .125" | 1.0 | % | ASTM D-1003 | | Yellowness Index YI (3 Yrs) | <2 | - | ASTM D-1925 | | MECHANICAL | | Tensile Strength Yield .125" | 9,000 | psi | ASTM D-638 | | Tensile Strength, Ultimate | 9,500 | psi | ASTM D-638 | | Tensile Modulus | 345,000 | psi | ASTM D-638 | | Compressive Strength | 10,400 | psi | ASTM D-695 | | Flexural Strength @ 5% Strain | 13,500 | psi | ASTM D-790 | | Flexural Modulus .125" | 345,000 | psi | ASTM D-790 | | Izod Impact Notched .125" | 12-14 | ft./lb./in./ of notch | ASTM D-256 | | Drop Ball IMpact .125" | >200 | ft.lbs | S.P. Test | | Gardner Impact 1/2" Diameter Dart | >320 | in.lbs | ASTM D-3029 | | THERMAL | | Deflection Temperature 264 psi | 270° | °F | ASTM D-648 | | Deflection Temperature 66 psi | 280° | °F | ASTM D-648 | | Vicat Softening Rate B | 310-315° | °F | ASTM D-1525 | | Coefficient of Thermal Expansion | 3.75 x 10-5 | in./.in/°F | ASTM D-696 | | FLAMMABILITY | | Horizontal Burn, AEB | <1 | in | ASTM D-635 | | Horizontal Burn, ATB | <1 | min | ASTM D-635 | | Ignition Temperature Self | 1070 | °F | ASTM D-1929 | | Ignition Temperature Flash | 870 | °F | ASTM D-1929 |
  
| | | | | |   |