|
BACK to Expandable Sleeving
 Product Construction
FLEXO WRAP is a lightweight, expandable, braided monofilament sleeving with a hook and loop fastener, Designed to allow easy wrap bundling and protection for wires, cables, hoses and tubes. Braided from durable P.E.T. monofilaments for continuous protection from abrasion and environmental wear. Resistant to U.V. light, most chemicals and common solvents, Will not degrade when exposed to fuels, oils, grease or salt water, and impervious to rot and fungus. Melting temperature is 250°C on the monofilament and 260°C on the fastener. Available in standard or flame retardant grades. Applications FLEXO WRAP neatly bundles and protects wires, cables, hoses and tubes.The hook and loop fastener design allows easy wrap harness assembly and easy access for harness rework with out disrupting existing connections, or routing sleeving over the entire bundle.
Advantages
- Easy On an Easy Off wrap sleeving for new and existing harness
- Convenient spot access for rework on specific sections of the harness
- Open weave design conforms to a variety of bundle diameters and irregular shapes
- Easy access for harness breakouts
- High abrasion, cut through, heat, rot and chemical resistance
- No tool required to close fastener
Hook and Loop Properties
| Material: | 100% Nylon | | Melt Temp: | 260°C - Heat resistance to 140°C | | Flammability: | Meets F.A.R. 25.853 par(b), (b2)& (b3) | | Cycle life: | 10,000 cycles | | Shear Strength: | 9 to15 psi | | Break Strength: | 100 piw | | Tensile Strength: | 6 to 9 psi | | Environmental Effects: | Cold temperatures increase closure strength | | Water Immersion: | Retains 50 % of strength | | Chemical Resistance: | Acetones, Acids, Alkalines, Hydrocarbons |
 | 
NOMINAL DIA.
| FLEXO WRAPT
| PART #
| NOMINAL INSIDE DIAMETER
| | FW 3X | 0.60" | | FW 4X | 0.75" | | FW 6X | 1.25" | | FW 9X | 2.00" | Nominal Inside diameter will range from .50" to 2.25"
FWFR - FLAME RETARDANT GRADE
FWPT - STANDARD GRADE | | 
BACK to Expandable Sleeving |