| | HS400 105°C PVC Heat Shrinkable |
BACK to Heat Shrinkable Tubing Advantages | Applications | Properties | HS400
Product Construction NATVAR HS400 is a thin wall, UL and CSA approved, heat shrinkable polyvinyl chloride tubing designed for -30°C to 105°C operation. NATVAR HS 400 meets ridged UL VW-1 flammability requirements, and is 600 volt rated. Diameter reduction of 50% occurs with controlled heat between 140°C and 160°C. NATVAR HS400 tubing should be stored below 77°F (25°C) and away from direct sunlight and used within 3 months of delivery. Sizes & Colors: Available in 1/16" to 2", in black and clear, with or without print for UL and CSA identification. Additional sizes and colors available on request. Product Advantages -
Low cost - Effective alternative to crosslinked polyolefins -
Mechanical Protection-Resists bending,vibration and stress -
Easily Applied -
Low Linear Shrinkage - Controlled to 20% or less longitudinal loss -
Good Diameter Shrinkage - 2:1 with heats above 140°C -
CSA File #73788 -
UL File #E15069 Applications -
protects connections lead wires and solder joints -
HS400 is used for strain relief, wire identification, bundling, harnessing and mechanical protection Typical Properties | Property | Test Method | Typical Values | | Ultimate Elongation | UL224 | 300% | | Tensile Strength | MIL-I-23053/2B,Class 2, UL 224 | 3,300lb.sq.in | | Longitudinal Change | 150°C (5 min)
MIL-I-23053/2B,Class 2 | 15-20% | | Dielectric Strength | ASTM D876 | 600V/Mil | | Vol Resistivity | ASTM D257 | 1013 ohms cm | | Flame Resistance | UL224 (VW-1) | Pass | | Corrosive Resistance | MIL-I-23053/2B,Class 2, UL 224 | Non Corrosive | | Specific Gravity | ASTM D792 (A-1) | 1.31 | | Heat Resistance | UL224(168 hrs @ 136°C) |
| | Ultimate Elongation | UL224 | 80% of original | | Heat Shock | UL224 (1hr @ 121°C) | No failure with 20% stretch | | Cold blend | UL224 (1hr @ -30°C)
CSA C22.2, No. 198-1 | No failure with mandrel wrap | HS400 HEAT SHRINKABLE TUBING | Ordering ID | Expanded ID | Recovered ID | Wall ID | Std. Spool | | 1/16" | .062 | .031 | .018 | 1,000' | | 3/32" | .094 | .047 | .020 | 1,000' | | 1/8" | .125 | .062 | .020 | 1,000' | | 5/32" | .156 | .078 | .020 | 1,000' | | 3/16" | .189 | .094 | .020 | 1,000' | | 1/4" | .252 | .126 | .025 | 1,000' | | 5/16" | .313 | .156 | .025 | 500' | | 3/8" | .374 | .189 | .025 | 500' | | 1/2" | .500 | .250 | .025 | 500' | | 5/8" | .625 | .313 | .025 | 250' | | 3/4" | .748 | .374 | .030 | 250' | | 1" | 1.000 | .500 | .035 | 250' | | 11/4" | 1.250 | .625 | .040 | 250' | | 11/2" | 1.500 | .750 | .040 | 100' | | 2" | 2.000 | 1.000 | .045 | 100' | 
BACK to Expandable Sleeving |