BACK to Heat Shrinkable Tubing

SOLDER TERMINATION SLEEVES (STS) (Provides for Soldering, Insulating, sealing and strain relieving in a single step) INSPECTABLE, RELIABLE & REPEATABLE SOLDERING NAS 1744 NAS 1745 NAS 1746 MIL-S-83519/1 No Ground Leads MIL-S-83519/2 Grounds Leads (MIL-W-22759/32) Specials (Custom Length, Diameters & Preforms) Local Manufacturing Quick Turnaround

	SUMITUBETM POLYVINYLIDENE FLUORIDE (KYNARTM)
K	Translucent Semi-rigid Available in 4 foot lengths Meets all the requirements of MIL-I-23053/8 UL recognized under Subject 224 with VW-1 and 600V rating and 150oC rating Shrink temp of 175°C Service Temp. -55°C to +175°C Used in applications requiring highly flame resistant and highly abrasion resistant tubing
K2	Clear Flexible Available on spools only Meets all of the requirements of MIL-I-23053/8 Meets all of the requirements of MIL-I-23053/18 Class 1 UL recognized under Subject 224 with VW-1 and 600V rating Shrink Temp. of 150°C Service Temp. -55°C to +175°C
K3	Clear Very Flexible Available on spools only Thin Wall Meets all of the requirements of MIL-I-23053/18 Class 3 Shrink Temp. of 90°C
	SUMITUBETM ELASTOMER TUBING
FE3	Very Flexible Fluoroelastomeric Tubing Meets all of the requirements of MIL-I-23053/13 and MIL-R-46846 Type III Available in Black, White, and selected colors Shrink temperature of 120°C Service Temp. -55°C to +200°C Used in high temperature and engine applications where fluid resistance is required
R10	Flexible Chlorinated Polyolefin Meets all of the requirements of MIL-I-23053/1 Class 1 and Class 2 Meets all of the requirements of MIL-R-46846 Type I Class 1 Shrink temperature of 150°C Service Temp. -75°C to +120°C Highly abrasion resistant ----- good solvent resistance
R120	Flexible Elastomeric Polyolefin Meets all of the requirements of MIL-I-23053/16 Shrink temperature of 150°C Service Temp. -75°C to +120°C Highly resistant to aviation and diesel fuels, hydraulic fluids, grease and lubricants Available in a thin-wall version = R120 (TW)
W5E	Exceptionally tough and flexible elastomer with an adhesive liner Shrink ratio = 3:1 Standard colors are Black and Red ----- designed for battery cable applications Shrink temperature of 110°C Service Temp. -55°C to +125°C Not flame retardant
	SUMITUBETM FLEXIBLE POLYOLEFINS
B2	Meets all of the requirements of MIL-I-23053/5 Class 1 & Class 3 Meets all the requirements of MIL-R-46846 Type V Shrink temperature of 90°C Operating Temperature Range -55°C to +135°C Continuous Used in general purpose applications: I.D. marking, color coding, electrical insulation, strain relief, wiring harness bundling Available in all nine colors
B2(3X)	Over expanded flexible polyolefin 3:1 shrink ratio UL VW-1 recognized Shrink temperature of 90°C Indefinite storage life Operating Temperature Range -55°C to +135°C Continuous
B2(4X)	Over expanded flexible polyolefin 4:1 shrink ratio Meets the requirements MIL-I-23053/5 Class1 (except wall thickness) Minimal Longitudinal shrinkage (5% max) Shrink temperature of 90°C Operating Temperature Range -55°C to +135°C Continuous Special purpose applications on cable jacket retrofit or repair
A2	Clear flexible Polyolefin allows visual inspection of substrate Meets all of the requirements of MIL-I-23053/5 Class 2 Shrink temperature of 115°C
F2	Flexible Polyolefin UL / VW -1/ CSA surface printed
F4	Very flexible Polyolefin Thin Wall UL/ VW-1/ CSA surface printed Shrink temperature of 90°C Indefinite Storage Life Thin wall provides rapid shrinking ----- is especially well-suited for applications of limited clearance (high density wiring)
	SUMITUBETM DUAL WALL POLYOLEFIN
W5DL	Semi-rigid - Encapsulant-lined Shrink Ratio of 3:1 Meets all the requirements of MIL-I- 23053/4 Class1 Shrink temp of 130°C Service Temp. -55°C to +110°C Not flame retardant Inner meltable wall encapsulates substrate Excellent for stain relief applications
O2B2	Flexible - Adhesive-lined Shrink Ratio of 2:1 Flame retardant jacket Meets the requirements of MIL-I- 23053/4 Class 2 Shrink Temp. of 110°C UL recognized under Subject 224 with 125°C 600V rating Modified polyamide adhesive liner provides an environmental seal ----- immersion and splash protection Available with UL surface printing = O2F2
W3B2	Flexible Adhesive-lined Shrink Ratio of 3:1 Flame retardant jacket Meets all of the requirements of MIL-I-23053/4 Class 3 Shrink Temp. of 110°C UL recognized under Subject 224 with 125°C 600V rating Modified polyamide adhesive liner provides an environmental seal ----- immersion and splash protection Available with UL surface printing = W3F2
W3B2 (4X)	Flexible Adhesive-lined Shrink Ratio of 4:1 Flame retardant jacket Shrink Temp. of 110°C UL recognized under Subject 224 with 125°C 600V rating Modified polyamide adhesive liner provides an environmental seal ----- immersion and splash protection Extremely economical application when used as a replacement for a heat-shrinkable molded shape

BACK to Expandable Sleeving