| | Tabtag Material Specifications |
BACK to Identification and Labels
200- | 500- | 788- | Static Free Labels
| MATERIAL SUFFIX | 100 | 102 | 105 | | Material | Self-Laminating Vinyl Film | Flexible White Vinyl Film | Self-Laminating Vinyl Film | | Thickness | 3.5 MIL | 8.4 MIL | 4 MIL | | Adhesion to Steel | 50 oz./in. width;
15 min. applied | 22 oz./in. width;
15 min. applied | 43 oz./in.after 72 hrs.
on stainless steel | | Temp. Range | -50°F to +200°F
(-46°C) (+93°C) | -20°F to +176°F
(-29°C) (+80°C) | -40°F to +275°F
(-40°C) (+135°C) | | Minimum Application Temp. | 40°F | 50°F | 50°F | | Chemical Resistance | Good for most petroleum solvents and lower aliphatic alcohols. Not good for most esters and ketones. Water-resistant. | Good for most petroleum solvents and lower aliphatic alcohols. Not good for most esters and ketones. | Good for most petroleum solvents and lower aliphatic alcohols. Not good for most esters and ketones. Water-resistant. | | Description | A conformable, frosty, clear vinyl with good contact clarity suitable for a wide range of permanent self-laminating applications. Designed with a clear vinyl overlap to protect the legend area. Self-extinguishing. | A matte coated flexible vinyl film with an acrylic pressure sensitive adhesive. | For use in laser printers. A conformable, frosty, clear vinyl with good contact clarity suitable for a wide range of permanent self-laminating applications. Designed with a clear vinyl overlap to protect the legend area. | | Application | Excellent for on-the-job wire marking. Ideal for flat ribbon cable, machine tool and underground wiring. Somewhat conformable to compound curves. | Ideal for conformable wire marking on small gauge wires & cables. Can be used as a computer generated alternative to pre-printed card labels. | Excellent for on-the-job wire marking. Ideal for flat ribbon cable, machine tool and underground wiring. Somewhat conformable to compound curves. | | Adhesive Type | Acrylic pressure sensitive. | Acrylic permanent. | Acrylic pressure sensitive. | | MATERIAL SUFFIX | 200 | 202 | 300 | 400 | | Material | Plastic Cloth | Vinyl Cloth | Polyvinylfluoride Film | Polyester Film | | Thickness | 6.0 MIL | 7.0 MIL | 2.0 MIL | 2.0 MIL | | Adhesion to Steel | 55 oz./in. width;
15 min. applied | 50 oz./in. width;
15 min. applied | 40 oz./in. width;
15 min. applied | 37 oz./in. width;
15 min. applied | | Temp. Range | -50°F to +170°F
(-46°C) (+77°C) | -50°F to +170°F
(-46°C) (+77°C) | -50°F to +225°F
(-46°C) (+107°C) | -65°F to +300°F
(-54°C) (+149°C) | | Minimum Application Temp. | 40°F | 40°F | 50°F | 45°F | | Chemical Resistance | Good for most petroleum solvents and lower aliphatic alcohols. Poor for most esters and ketones. Water-resistant. | Good for most petroleum solvents and lower aliphatic alcohols. Water-resistant. | Excellent resistance to many chemicals, solvents, and staining agents. | Applied labels will be resistant to water, mild acids, alkalis, salts, and most petroleum-based oils, greases, aliphatic solvents such as Kerosene, Keptane and reference fuel. | | Description | HIgh strength material allows for excellent printing and write-on capabilities. | HIgh strength material allows for excellent conformability to tight curves. | Smear-resistant and self-extinguishing. Highly U.V. resistant resulting in 5 to 7 year outdoor durability. | Polyester film with good imprinting characteristics and excellent smudge-resistance. U.L. listed.
C.S.A. approval available-consult HellermannTyton. | | Application | For general purpose, temporary or permanent labeling. Adheres well to a variety of flat and curved surfaces. Good for EPROM and P.C. board applications. | For identification of small wire gauges or labeling involving tight curves or angles. Adheres well to a variety of flat surfaces. | For applications requiring self-extinguishing, easily printed identification of wire and cable. | For labeling applications requiring solvent or high temperature resistance. Bar code printable. Two year outdoor durability. | | Adhesive Type | Pressure sensitive synthetic rubber. | Pressure sensitive synthetic rubber. | Acrylic pressure sensitive. | Acrylic pressure sensitive. | | MATERIAL SUFFIX | 500 | 600 | 700 | 706 | 707 | | Material | Tamper-Evident Vinyl Film | Metalized Polyester Film | Paper | Uncoated Litho Paper | Paper | | Thickness | 2.5 MIL | 2.0 MIL | 3.5 MIL | 4.5 MIL | 4.5 MIL | | Adhesion to Steel | Destroys on removal | 37 oz./in. width
15 min. applied | 45 oz./in. width;
15 min. applied | 40 oz./in. width;
15 min. applied | 13 oz./in. width;
15 min. applied | | Temp. Range | -65°F to +200°F
(-54°C) (+93°C) | -65°F to +300°F
(-54°C) (+149°C) | -65°F to +200°F
(-54°C) (+93°C) | -65°F to +200°F
(-54°C) (+93°C) | -20°F to +200°F
(-29°C) (+93°C) | | Minimum Application Temp. | 50°F | 45°F | 35°F | 35°F | 40°F | | Chemical Resistance | Applied labels will be resistant to water, mild acids, alkalis, and salts. Topcoat provides smudge-resistance when in contact with commercial alcohol-based cleaners. | Applied labels will be resistant to water, mild acids, alkalis, salts, and most petroleum-based oils, greases, aliphatic solvents such as Kerosene, Keptane and reference fuel. | Resistance to humidity and water. | Resistant to humidity and water. | Smudge-resistant. | | Description | A premium quality ultra-destructible vinyl film, designed specifically for applications requiring tamper-evident features, with a topcoat formulated to accept computer imprinter inks. | Specially formulated topcoat provides a good smudge-resistance. Metalized. Outdoor durability 2 years. U.L. listed.
C.S.A. approval available-consult HellermannTyton. | A bleached kraft base paper with a semi-gloss finish that is latex impregnated for excellent conformability and flexibility. Internal strength and tear-resistance higher than ordinary paper. | A bleached sulfate featuring high internal strength and tear resistance. The matte finish allows for printing by all standard methods without needing specially formulated inks. | A white, uncoated, bleached kraft stock that is highly receptive to inks and markings. | | Application | Ideal for serial number labeling or other non-removable, tamper-resistant identification. Outdoor durability is 5 years. Good for calibration seals. | For property identification, product information, rating or serial plates, warranty labels and inventory control labels. | Ideal for temporary identification with outstanding performance on a wide variety of substrates under variable environmental conditions. | Ideal for a wide variety of substrates where permanent identification is needed. | For removable, temporary identification such as inventory or maintenance labels.< /TD> | | Adhesive Type | Acrylic pressure sensitive. | Acrylic pressure sensitive. | Rubber-based pressure sensitive. | Acrylic permanent. | Rubber-based pressure sensitive. |
| MATERIAL SUFFIX | 788 | 789 | 800 | 900 | SF1 | | Material | Polyester | Polyester | Self-Laminating Polyvinylfluoride Film Clear Tedlar | Polyimide Film | Static Dissipative Paper | | Thickness | 2 MIL | 2 MIL | 1.0 MIL | 2.0 MIL | 4 MIL | | Adhesion to Steel | 22 oz./in. after 72 hrs.
on stainless steel | 73 oz./in. after 72 hrs
on stainless steel | 35 oz./in. width;
15 min. applied | 70 oz./in. width;
15 min. applied | 50 oz./in. after 72 hrs.
on stainless steel | | Temp. Range | -40°F to +194°F
(-40°C) (+92°C) | -40°F to +300°F
(-40°C)(+150°C) | -50°F to +225°F
(-46°C)(+107°C) | -100°F to+500°F
(-73°C)(+260°C) | -20°F to +250°F
(-29°C) (+120°C) | | Minimum Application Temp. | 23°F | 50°F | 50°F | 50°F | 50°F | | Chemical Resistance | Good adhesion to non-polar substrates and good low temperature performance. Liner: 68# special coated white kraft. | Applied labels will be resistant to water, mild acids, alkalis, salts, and most petroleum-based oils, greases, aliphatic solvents such as Kerosene, Keptane, and reference fuel. Liner: 90# special coated white kraft. | Excellent chemical resistance to water, alkalis, acids, and salts. Resistant to most petroleum-based oils, greases, and solvents. | Applied labels will be resistant to water, mild acids, alkalis, salts, and most petroleum-based oils, greases, aliphatic solvents such as Kerosene, Keptane, Ketone and reference fuel. | Resistant to humidity and water. | | Description | For use in laser printers. Good imprinting characteristics and excellent smudge resistance. Good UV resistance. | For use in laser printers. Good imprinting characteristics and excellent smudge resistance. Good UV resistance. | Good conformability and designed with a clear vinyl overlap to protect the legend area. | A computer printable polyimide film designed to withstand various soldering fluxes including molten solder dips and cleaning solvents. | A static dissipative paper face stock coated with static dissipative adhesive system. | | Application | Due to pretreatment, the film is printable by all common label printing methods. This material is imprintable by laser, dot matrix, thermal transfer and ink-jet (solvent based inks) methods. Personal page laser printers induce some curl of the sheets, due to the thermal shrinkage of the face material. Bar code printable. | For flat surface labeling applications requiring solvent or high temperature resistance. Bar code printable. Two year outdoor durability. | For applications requiring self-extinguishing, laminating labels. Ideal for small diameter wires. | Ideal for PC board assembly and bar code printing. | For use on IC's and other static sensitive components. Bar code labels for printed circuit boards. | | Adhesive Type | Acrylic pressure sensitive. | Acrylic pressure sensitive. | Acrylic pressure sensitive. | Silicone pressure sensitive. | Permanent dissipative. Adhesive resistance of 106 ohms/sq. in. | Above products should be tested thoroughly under end use conditions to determine suitability for their applications. Static Free Labels HellermannTyton's static free labels are made from a specially formulated paper and adhesive and can be used in the electronics industry, where critical handling of static sensitive devices makes ESD (electro static discharge) a major concern. Static free labels are used in clean room applications or anyplace where unwanted static discharge can cause damage to sensitive components. HellermannTyton static free labels can typically dissipate an electrical charge in .01 to .18 seconds. By comparison, a standard paper label can hold the same charge for 60 to 100 seconds. Reference the following Tabtags in static free material (SF1) for more information on static free labels: TAG11-SF1, TAG13-SF1, TAG15-SF1. 
BACK to Identification and Labels |