|
BACK to Tubing and Sleeving Typical Properties
Product Construction Natglas consists of a tightly braided fiberglass sleeving designed as Class 240C insulation. Natglas is heat annealed to remove organic impurities, improve handling and reduce end-fray. The sleeving is compatible with varnishes, epoxies and bonding agents where maximum reinforcement between the glass and encapsulant is needed . Natglas-TD is similar to Natglas with the addition of a saturant of clear or colored high temperature resin. This treatment affords additional fray resistance and firmness required for cutting and installation.
Applications
-
Primary and secondary insulation for motor leads -
Small appliances -
Brush assemblies -
Electric resistance heating elements and similar low voltage applications -
Ideal for abrasion and cut through protection over insulated leads
Typical Properties | Property | Test Method | Typical Values | | Flammability | NEMA VS-1 | Non-Combustible | Thermal Aging,°C
(Continuous Operating Temp.) | NEMA VS-1 | 240 |
NATVAR NATGLAS is recognized by:
UnderWriters Laboratories under File Card #E-51635 as FR-1 sleeving. 
BACK to Heat Tubing and Sleeving |